Diamond C4GFEV7-BF Manual De Uso E Instalación página 47

SAFETY THERMOSTAT
REPLACEMENT
1. Unscrew the thermostat from the
support (
2. Remove the bulb from the support
3. Screw the new thermostat and in-
sert the new bulb into the support
LOCATION OF MAIN COMPONEN-
TS - see SECT. IMAGES - REF. r)
The layout of the figures is purely indi-
cative and can undergo variations.
1. Open burners adjustment knob
2-3. Thermostat adjustment knob
(gas / ele)
4. Piezoelectric button / Electronic
ignition (optional)
7. Cooking compartment (oven)
8. Hob (gas range - hotplates)
9. Pilot light control
KNOBS, KEYS AND INDICATOR
LIGHT MODES AND FUNCTIONS
see SECT. IMAGES - REF. s). The
layout of the keys in the figures is pu-
rely indicative and can be subject to
variations.
BURNER REGULATION KNOB
1
(GAS). It performs three different
functions:
1. Igniting the pilot light and burner.
2. Adjusting the flame (minimum - ma-
ximum).
3. Turning the appliance off.
THERMOSTAT KNOB (GAS). It
2
performs three different functions:
1. Igniting the pilot light and burner.
2. Temperature regulation.
3. Turning the appliance off.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
REPLACING COMPONENTS
BULB REPLACEMENT
1. Disconnect the electrical con-
nections
2. Fit the new bulb
3. Reconnect the cables
Check the gas seal with the
appropriate instruments and
replace the parts removed in
the correct order.
INSTRUCTIONS FOR USE
THERMOSTAT KNOB (ELE). It
3
performs three different functions:
1. Temperature regulation / 2. Heating
phase Start/Stop / 3. Grill function
PIEZOELECTRIC BUTTON /
4
ELECTRONIC IGNITION (optio-
nal). It performs one function:
1. When pressed, it produces the
spark to ignite pilot light.
GREEN
5
(GAS/ELECTRIC): The indicator
is subordinated to use of the switch-on
knob. Lighting of the indicator signals
the operating phase.
YELLOW
6
(GAS/ELECTRIC):
sent, the indicator is subordinated to
use of the thermostat knob. Lighting of
the indicator signals the heating phase.
STARTING PRODUCTION
Before proceeding see chapters
2 and 5.
The products must be placed in
the specific cooking containers
and positioned correctly on the
burners and/or in the cooking com-
partment of the oven.
Diameter Pots / Burner 5.5-7-11
kW Ø mm 200-375
- 18 -
INDICATOR LIGHT
INDICATOR LIGHT
When
9.
pre-