Idiomas disponibles
Idiomas disponibles
rating area for maintenance must be set
up in such a way that the safety of the
operator is not endangered. The room
must also be provided with the features
required for installation, such as:
maximum relative humidity: 80%;
•
minimum cooling water temperature
•
> + 10 °C ;
the floor must be anti-slip, and devi-
•
ces positioned perfectly level;
the room must be equipped with a
•
ventilation system and lighting as
prescribed by standards in force in
the country of the user;
the room must be set up for draining
•
greywater, and must have switches
and gate valves which cut all types
of supply upstream the appliance
when needed;
The walls/surfaces immediately clo-
•
se/contact to the appliance must be
fireproof and/or isolated from possi-
ble source of heat
TEST INSPECTION AND WAR-
RANTY / Testing: the equipment has
been tested by the manufacturer during
the assembly stages at the site of the
production plant. All certificates related
to the testing performed will be deli-
vered to the customer upon request.
Guarantee: the warranty is 12 mon-
ths from the date of invoicing of the
equipment, this period cannot be ex-
tended. It covers the faulty parts only.
Carriage and installation charges are
for the buyer's account. Electric com-
ponents, accessories as well as other
removable parts are not covered by the
guarantee. Labor costs relating to the
intervention of authorized by the manu-
facturer at the customer's premises, for
removal of defects under warranty are
charged to the dealer. Excluded are all
tools and supplies, possibly supplied by
the manufacturer together with the ma-
chines. Damage occurred in transit or
due to incorrect installation or mainte-
nance can't be considered. Guarantee
is not transferable and replacement of
parts and appliance is at the final discre-
tion of our company. The Manufacturer
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
- 4 -
is responsible for the equipment in its
original configuration and only for origi-
nal spare parts replacement. The ma-
nufacturer declines all responsibility for
improper use, for damages caused as a
result of operations not covered in this
manual or not authorized in advance by
the manufacturer.consideration in this
manual or without prior authorisation of
the manufacturer himself.
THE WARRANTY TERMINATES
IN CASE OF / • Damage caused by
transport "ex works" (EXW) and / or by
handling, should this event occur, the
customer must inform the retailer and
the carrier (eg. via e-mail and / or web-
site) and write down on the copies of
the transport documents what It's hap-
pened. The technician authorized to
install the appliance will evaluate the
damage and decide if the installation
can be carried out. The warranty also
terminates in the presence of: • Dama-
ge caused by incorrect installation. / •
Damage caused by parts worn due to
improper use. / • Damage caused by
use of non-original spare parts. / • Da-
mage caused by incorrect maintenance
and/or lack of maintenance. / • Dama-
ge caused by failure to comply with the
procedures described in this document.
AUTHORISATION / Authorisation
refers to the permission to operate an
activity intrinsic to the appliance. Au-
thorisation is given to anyone who is
responsible for the appliance (manu-
facturer, purchaser, signer, dealer and/
or location owner).
FLEX BURNER / The indication "Flex
Burner" refers to the option of changing
the position of the open-flame burners
inside the equipment. This operation
can only be performed by the autho-
rised technical assistance service
(see Chapter 7 – Flex burner).
TECHNICAL DATA and IMAGES /
The section is at the ending of this
manual.
