Corghi ET 1450 Manual De Uso página 97

When the measurement is stored, the value of the distance acquired by the machine
remains displayed on the left display:
- if only one measurement is taken, the machine interprets the presence of a rim with bal-
ancing using a clip weight on both sides (Dynamic Balancing Programme)
- moving the arm to the rest position, the machine will set up for the manual WIDTH entry.
- in this phase, it is possible to perform an additional acquisition of the rim diameter and
distance.
- Measure the width of the rim using the
provided calliper (fig. 14).
- Modify the width value displayed by
pressing the
the desired value is set.
The WIDTH can be set in millimetres or
the values already set can be converted
from inches to millimetres by pressing the
button.
Operator's Manual ET 1450
keys until
13
UK
14
97