Set Up - Beeper; Set Up - Adhesive Weight Application Position - Corghi ET 1450 Manual De Uso

The machine can be configured to beep each time a key is pressed on the keypad.
Proceed as follows to modify this configuration:
- Press the
- use the
- press the
- use the
- press the
1 - low beep
2 - medium beep (factory setting)
3 - High beep
OFF - acoustic signal disabled
- press the
SET UP - ADHESIVE WEIGHT APPLICATION
The machine makes it possible for the operator to select where the adhesive weight should
be applied based on his needs. To select this configuration, proceed as described below:
- Press the
- use the
- press the
- use the
present
118

SET UP - BEEPER

key.
keys to search for SEt UP
key to confirm
search for the item biP 2 (biP oFF if the acoustic signal is disabled)
key to change the setting:
key to confirm and exit.
POSITION
key.
keys to search for SEt UP
key to confirm
keys to search for ALU H.12 (ALU H.6), using the laser line if
Operator's Manual ET 1450