Corghi ET 1450 Manual De Uso página 105

UNBALANCE DISPLAY WITHOUT
When started up, the machine is set to display the unbalance values at five-gramme in-
crements, i.e. rounded to the nearest multiple of five (or quarters of an ounce if visualised
in ounces).
In this condition, the first four grams of unbalance are not displayed since an appropriate
threshold, indicated by illumination of the
The key can be pressed to temporarily eliminate the threshold (the LED "g x 5";
"oz x 1/4" goes out) and the unbalance values will be displayed gram by gram (or in tenths
of an ounce if display in ounces is active).
CAUTION
This key is deactivated if the gram by gram unbalance display has been set in the ma-
chine set up or if the ALU1P or ALU2P balancing programme is used.
BALANCING WEIGHT APPLICATION
• clip weights
- Select the first side to be balanced.
- Turn the wheel until the central element of the corresponding position indicator lights
up.
- Apply the indicated balancing weight in the position of the rim corresponding to 12
o'clock.
CAUTION
Check that the system which fits the weight to the rim is in optimum condition.
A weight which is not fitted properly or correctly may come off as the wheel rotates,
thus creating a potential danger.
Pressing the
time and the A STP message is displayed.
• Manually applied adhesive weights
- Select the first side to be balanced.
- Turn the wheel until the central element of the corresponding position indicator lights up.
- Apply the indicated balancing weight in the position of the rim corresponding to 12
o'clock.
Operator's Manual ET 1450
ROUNDING-OFF
button while the wheel is moving interrupts the wheel spin before
LED on the display panel, is activated.
UK
105