Corghi ET 1450 Manual De Uso página 109

To choose the exact position of weight P1 in relation to the unbalance Pe, use the 6 o'clock
point as your reference if "LAS" configuration is active, or the 12 o'clock point if the "H12"
configuration is active.
The angle between P1 and Pe must be less than 120°.
4 press the
5 turn the wheel to the point where the second outer weight (P2) should be applied behind
a spoke. The machine will display the following message:
To choose the exact position of weight P2 in relation to the unbalance Pe, use the 6 o'clock
point as your reference if "LAS" configuration is active, or the 12 o'clock point if the "H12"
configuration is active.
The angle between P1 and P2 must be less than 120° and must include the outer weight Pe.
6 press the
7 turn the wheel manually and the two unbalance values calculated are displayed in al-
ternation on the display regarding the outer side as the angular position of the wheel
changes. Each of the two balancing weights is applied as described in the chapter "Ap-
plying balancing weights in ALU1P or ALU2P balancing programmes".
Notes:
- The Hidden Weight procedure can be quit at any time by simply pressing the
.
key
- The Hidden Weight procedure is automatically deactivated by performing a wheel spin.
Operator's Manual ET 1450
key to memorise the first spoke.
key to memorise the second spoke
UK
109