Safety Pins; 1- How To Replace The Safety Pin - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

6.1- Safety pins

The harvester is equipped with two safety pins
located on the shafts of the cutting gears. The
function of these pins is to protect the harvester
in case of entry of any foreign body (pieces of
iron, stone, wood, etc.) or some feeding overload
during the operation.
When one of the safety pins breaks, the feeding
drums stop working and the machine stops
immediately.
If the safety pin is broken, replace it with another
of the same specification.
The use of improper safety pins
compromises the operation of the
safety system and may damage the
machine.
Do not replace the safety pin with
piece of iron, nail, bolt, etc. Use only
the original pins.
Eliminate the cause of pin breakage
before turning the machine on again.
6.1.1- How to replace the safety pin
ATTENTION!
Turn off the tractor and remove
the ignition key before starting the
following procedure.
Remove the bolt (A);
1.
Lift the platform fairing (B) and secure with
2.
the rod (C) to keep it raised;
Remove the 2 bolts (D) and the cutting
3.
gearbox cover (E).
Remove the 2 cutting gears (F).
4.
Remove the cutter set box (G);
5.
Instructions Manual
6. Maintenance
A
B
C
D
F
G
E
83