Safety Pins - Nogueira FTN-1900 Manual De Instrucciones

6.11- Safety pins

The harvester is equipped with safety pins
located on the shafts of the cutting gears.
The function of these pins is to protect the
harvester in case of entry of any foreign body
(pieces of iron, stone, wood, etc.) or some
feeding overload during the operation.
When one of the safety pins breaks, the
drums stops working and the platforms stop
harvesting immediately.
If the safety pin is broken, replace it with
another of the same specification.
The use of improper safety pins
compromises the operation of the
safety system and may damage the
machine.
Do not replace the safety pin with
piece of iron, nail, bolt, etc. Use only
the original pins.
Eliminate the cause of pin breakage
before turning the machine on again.
6.11.1- How to replace the safety pin
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Remove the covers (D) from the heads;
1.
Loosen the tensioner bolt (E) and remove
2.
the chain (G);
Instructions Manual
6. Maintenance
D
G
E
109