Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KNOTMAKER BLADE
The blades of the knotmakers are responsible for cutting the cords after tying
the bale. If they are not sharp, they will not cut evenly. They must be sharpened
or replaced when worn.
REGULATING THE NEEDLES BRAKE
The height L of the brake spring must remain equal to the height of the reference
plate B. Where necessary, adjust the pressure by the nut C.
NOTE: To obtain access to the needles brake, remove the side cover D.
L
L
B
IMPORTANT!
BLADE
C
fig. 150
Never apply any lubricant to the brake disc (half moon).
Replace the brake element when presenting excessive
fig. 78
wear.
Instructions Manual
fig.149
D
fig. 151
69
Capítulos
Tabla de contenido
