Tabla de contenido
Idiomas disponibles
Idiomas disponibles
REGULATING THE HEIGHT OF THE WHEEL OF THE COLLECTOR:
The function of this wheel is to allow the collector to accompany the undulations
when the baler works on uneven land. After regulating the collection height,
seen on the previous page, the height of the wheel must be regulated, pro-
ceeding in the following manner:
- Remove the four nuts and washers B.
- Remove the wheel and lower it to the soil.
- Replace the four nuts and washers B.
C
PLACING THE COLLECTOR IN THE TRANSPORT POSITION:
Whenever you transport the machine coupled to the tractor, keep the pick-up
lifted. By doing so, you will prevent that the springs and the pick-up get dama-
ged during transportation.
1 – Activate the hydraulic piston and lift the pick-up completely.
2 – Put the bolt B
NOTE: The bolt B prevents that all the pick-up weight remains supported on
the piston.
PISTON
B
Instructions Manual
fig. 28
fig. 27
27
Capítulos
Tabla de contenido
