REGULATING THE MOVEMENT OF THE NEEDLES (measure B).
After regulating the needles with the retainer disks, procedure described on the
previous page, regulate the movement of the needles, described as follows:
L
1 – Open the side cover L (picture 84).
fig. 84
2 – Manually turn the handwheel, until the
needles reach a higher point.
fig. 85
NOTE: The needles will be in the correct position when the handle and the re-
gulating arm are aligned (observe picture 87).
ARM
HANDLE
HANDLE
fig. 86
Turn the handwheel to raise the handle.
fig. 87
Handle and arm aligned.
52
Instructions Manual