Tabla de contenido
Idiomas disponibles
Idiomas disponibles
With the needles placed in the highest
point, the measure B must be from 135
to 140mm (picture 88).
3 – remove the side shield V.
4 – Loosen the safety bolt P (picture 89).
5 – Loosen the adjusting lock nut R (picture 90).
6 - Adjust the movement of the needles through the spindle S.
7 – Retighten the lock nut R and the safety bolt P.
IMPORTANT!
After the adjustment described above, you must observe the synchronism be-
tween the needles and the piston, according to the item "REGULATING NEEDLES
WITH THE PISTON" in this manual.
P
fig. 89
R
Instructions Manual
DISC
Measure B = Distance from the needle
tip from the disk = 135 to 140mm.
V
S
fig. 90
NEEDLE
B
fig. 88
53
Capítulos
Tabla de contenido
