Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SYNCHRONIZING ARM AND PISTON:
NOTE: Remember that before adjusting the arm with the piston, adjustment
should be made between the two arms, as described in the item 'ADJUSTING
THE POWER ARMS' in this manual.
With the power socket and the tractor engine disconnected:
1- Open the cowling A and the rear cover B.
2- Put the cord rolls in the lower compartment.
3- Disassemble the separating support of the rolls C.
A
C
fig. 73
fig. 74
4- Remove the screw of the pinion D.
5- Remove the screw E.
6- Using a stop pin, move the hexagonal shaft F in the direction of the arrow
(fig.75), until it exits the pinion and bearing G.
F
D
E
fig.76
fig. 75
48
Instructions Manual
Capítulos
Tabla de contenido
