2. Turn the handwheel manually until the tips of the needles are 5 to 10 milli-
meters above the bottom of the channel, measure A of fig.99.
IMPORTANT!
58
fig. 110
So that the adjustment is correct and that the needles
are not damaged, it is necessary to pay attention to the
following detail: Upon turning the handwheel, the piston
must move in the direction of compacting the bale, i.e. in
the bale outlet direction (as indicated in the figure below).
If not, continue turning the handwheel, always in a coun-
terclockwise direction, until the piston reaches the start
of the channel and returns in the compacting direction.
Never turn the handwheel in the opposite direction to
that of the arrow.
Instructions Manual
A
Direction of compacting
the bales
fig. 99
fig. 100