Nogueira EXPRESS-5040 Manual De Instrucciones página 83

SYMPTOM
The knot is badly done,
one of the ends of the
cord being bigger than
the other or there is a
loop at the
end of the cord.
End of the cord frayed.
CAUSE
1- The blade is blunt.
2- Tension very low in the
retaining clamp.
3- Wear in the retaining
disk or clamp.
4- Excessive density in
the bale.
5- Excessive tension in
the tying cords.
1- Blade blunt.
2- Tension very low in the
retaining clamp.
3- Excessive density in
the bale.
4- Wear in the retaining
disk and/or clamp.
Instructions Manual
PROCEDURE
1- Sharpen or replace
the blade.
2- Increase the tension
in the spring.
3- Replace the retaining
disk and/or clamp.
4- Reduce the compac-
tion in the bale.
5- Reduce the tension
of the cords.
1- Sharpen or replace
the blade of the knot-
maker.
2- Increase the ten-
sion in
the spring.
3- Reduce the tension
of
the cords.
4- Replace the retaining
disk and/or clamp.
83