Titration Table - Gima CMS8000 Manual Del Uso

45
Note
• For the drug calculation, the prerequisite is that the operator must first of all enter the patient weight and
drug name. The system first gives a group of random initial values, which cannot be used by the operator
as the calculation reference. Instead, he should enter a new group of values at the doctor's instruction.
• Each drug has its fixed unit or unit series. Operator must select the proper unit at the doctor's instruction.
If the result exceeds the system-defined range, it will display "---".
• After entering a value, a conspicuous prompt will appear in the menu warning the operator to confirm
the correctness of the entered value. The correct value is the guarantee for the reliability and safety of the
calculated results.
• In neonate mode, Drip Rate and Drop Size items are disabled.
• For each entered value, the system will always give a dialog box asking for the user's confirmation.
You must be careful when answering each box. The calculated result is reliable only after the entered value
is confirmed to be correct.
Select the drug name:
Turn the knob to pick the DRUG NAME item in DRUG CALC menu. The user may select the drug name in the
pull-down list, including AMINOPHYLLINE, DOBUTAMINE, DOPAMINE, EPINEPHRINE, HEPARIN, ISUPREL,
LIDOCAINE, NIPRIDE, NITROGLYCERIN, PITOCIN, Drug A, Drug B, Drug C, Drug D and Drug E. Calculation
for only one type can be generated each time.
Note
A,B,C,D,E are only codes for drugs instead of their real names. The units for these five drugs are fixed.
The operator may select the appropriate units according to the convention of using these drugs. The rules
for expressing the units are:
"mg" series units are fixedly used for drug A, B and C: g, mg, mcg.
"unit" series units are fixedly used for drug D: unit, k unit, m unit.
"mEq" is fixedly used for drug E.
Patient weight:
After accessing the DRUG CALC window, the operator should enter the patient weight into the first or the
second item. The entered weight will be used as the independent data only for the calculation of drug
concentration.
Note
This drug calculation function acts only as a calculator. That means the patient weight in Drug Calculation
menu and the patient weight in Patient Information menu are independent from each other. Therefore if the
Weight in Drug Calculation changes, the Weight in Patient Information does not change. In this way, we can
say, the Drug Calculation menu is independent from other menus in the system. Any change of it will not
affect other information about the patient being currently monitored.

8.2 titration table

Access titration table:
Select TITRATION item in DRUG CALC menu to enter titration table display.
Titration table display for drug is as following:
Figure 8-2 Titration