Recall; System Setup - Gima CMS8000 Manual Del Uso

16
Figure 3-4 Default Menu
In this sub-menu, you can select both the factory default and the user-defined default. Also in this sub-menu,
you can save the current system configuration as the user-defined default configuration. But at this time, the
system will automatically save all the setups in the parameter menu, ECG gain and filter way as the user-
defined default configuration according to the patient type. Also, the dialog box as shown below will pop up.
Figure 3-5 Confirm Default Config
Note
After selecting any item in the DEFAULT menu and exiting the box, the "CONFIRM TO SAVE" Dialog box will
pop up, in which you can select [YES] to confirm your selection or [NO] to give up your selection.
Warning
All configurations in the system will be replaced by "default configurations".

3.3 recall

In the "SYSTEM MENU", there are [TREND GRAPH], [TREND TABLE], [NIBP RECALL] and [ALARM RECALL]
items. Please refer to Chapter 7 Recall for detailed information.

3.4 System Setup

Select the [SYS SETUP] item in the [SYSTEM MENU]:
Figure 3-6 System Setup
In the [SYSTEM SETUP] menu,
users can setup the following items.