Gima CMS8000 Manual Del Uso página 145

25
Figure 3-24 LOCAL IP SETUP
• CARD TYPE: 3G, wireless and wire
3G
It is strongly required to use the accompanying 3G bracket provided by manufacturer. CDMA2000 is
appointed network, but WCDMA can be ordered.
After selecting 3G network, restart the device, then the device will obtain WAN (dynamic ip, DNS, etc.)
from 3G card and its driver.
Only when the net type is "CUSTOM" 3G is available.
Wireless
It is strongly required to use the accompanying wireless network card provided by manufacturer. Link router
complied with IEEE802.11(ordinary or household wireless network router). Support the certification mode for
WPA, WPA2 or WEP. Wireless network router links to Internet by WAN.
After selecting wireless network card, press "WIRELESS CONFIG" in "NET CONFIG" menu.
"WIRELESS CONFIG" menu appears,press "SEARCH ROUTES", the following menu appears.
Figure 3-25 SEARCH ROUTE
Select corresponding router for connecting according to actual requirement, and then press "CONNECT".
If connecting with safe router,enter correct password, the equipment will link to network automatically.
Wire
Wire network mode links to wire LAN complied with IEEE802.3 by RJ45 mode.LAN links to Internet by WAN.
• LOCAL NET NO:the physical Bed No.
• SERVER IP:when net type is CUSTOM ,you can change Central Monitoring System's IP.
• LOCAL IP CONFIG:only when the net type is "CUSTOM"this item is available.You can set the current
machine's IP.Press this button to pop out "LOCAL IP SETUP"menu.
• SELECT ROUTE:press this item to pop "WIRELESS CONFIG"menu.