Interfaces - Gima CMS8000 Manual Del Uso

11
When the cursor is in the waveform area, the user may immediately modify the current setup. When the cursor
is in the parameter area, the user may open the setup menu of the corresponding parameter module so as to
set up the menu items of the module.
Operating method:
• Move the cursor to the item where the operation is wanted
• Press the knob
• One of the following four situations may appear:
1. The cursor with yellow frame becomes into the one with cyan frame, which implies that the content in the
frame can change with the rotation of the knob.
2. Menu or measuring window may appear on the screen, or the original menu is replaced by the new menu.
3. A check mark "√" appears at the position, indicating that the item is confirmed.
4. The system immediately executes a certain function.

1.4 Interfaces

For the convenience of operation, the different kinds of interfaces are in different parts of the monitor.
• Front view
Figure 1-2 Front View
1 ON/OFF button
ON: press this button to turn on the device
OFF: under device on state, press this button for 3 seconds to turn it off
2 AC indicator: the device has connected to external AC power
3 Running indicator: the device is running
4 Refer to Chapter 1.3 Button Functions for details
5 Rotary knob: refer to Chapter 1.3 Button Functions for details
6 Alarm indicator: indicating different alarm level with different color and flicking frequency
• Right side view
Figure 1-3 Right Side
1 Recorder
1
2 3 4
1
6
5