Tabla de contenido
Idiomas disponibles
Idiomas disponibles
21
You can choose the parameters to be monitored in this menu. This can avoid the interference from the
parameters that need not attention. This function can be select only when you have ordered the
corresponding optional module.
3.4.6 time Setup
Select the [TIME SETUP] item in the "SYSTEM SETUP" menu. The menu as shown below will pop up.
System time is in the format of year, month, day, hour, minute and second. Use cursor to highlight the item
that you want to modify and turn the knob to select time. Then select [SAVE SET].
Note
You shall set up the system time upon turning on the monitor (if you need to set up the system time);
otherwise, when you review the content with time information, the system may not display the correct time.
Figure 3-17 System Time Setup
3.4.7 Alarm setup
The system provides 7 levels of alarm volume. You can select any of them as per the clinical requirement.
The procedures are:
Select the [ALARM SETUP] item in the "SYSTEM SETUP" sub-menu of the "SYSTEM MENU" menu.
The menu as shown below will pop up, in which you can set up the alarm volume and other alarm
information. For detailed information, refer to Chapter Alarm.
Figure 3-18 Alarm Setup
You can highlight the [ALARM VOL] item and then turn the knob to set up the alarm volume. There are 7
options:1~7.
Capítulos
Tabla de contenido
