Technical Characteristics Of The Product; Model Door Type; Ndcc2301; Mono-Phase - Nice NDCC4001 Instrucciones Y Advertencias Para La Instalación Y El Uso

9

TECHNICAL CHARACTERISTICS OF THE PRODUCT

WARNINGS: • All technical characteristics stated in this section refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.A. reserves the right to apply
modifications to products at any time when deemed necessary, maintaining the same intended use and functionality.
Model
Type
Power supply voltage
Motor max. power
Power in Stand-by mode
Power board fuse
NDA001 logic board fuse
Output 1 (FLASH)
Output 2 (SCA)
Output 3
Traffic light output
BLUEBUS output
Services output
"STOP" input
"ALT" input
Input 1 (STEP-STEP)
Input 2 (OPEN)
Input 3 (CLOSE)
Radio connector
Radio AERIAL input
Programmable functions
Functions in self-learning mode
Operating temperature
Use in particularly acid, saline or
potentially explosive atmospheres
Protection rating
Vibration
Dimensions
Weight
22
DIC4001 NDCC4002
Nice control unit for mono-phase or three-phases motors with mechanical or electronic limit switch
Three-phase 3x400Vac / 3x230Vac (+10% -10%) 50/60Hz
1.1KW 2.2KW
F1, F2, F3: 6.3A type T quartz
F4: 1A type T quartz
for 1 LUCYB, MLB or MLBT flashing light signal (12V – 21W)
1 output with maximum load of 12 Bluebus units
24Vdc +/-15% between terminal Input 1 (S.S.) and Input STOP (see paragraph 3.5)
For normally closed, normally open, 8.2KΩ constant resistance or OSE optical type contacts; in self-learning
mode (a change from the memorised state prompts the "STOP" command)
For Normally Closed contacts of the safety circuit
SM connector for receiver types SMXI, SMXIS, OXI or OXIT
8 ON-OFF functions and 8 adjustable functions (see tables 5 and 7) and additional programming through the
Self-learning of devices connected to the BlueBUS output. Self-learning of "STOP" type devices (contacts NO, NC
Assembly without oscillation (e.g. on a masonry wall)
NDCC4005
5.5KW
<1W
F1, F2, F3: 10A type
T quartz
F4 1A type T quartz
3.15A type T
for signal indicator 24Vdc (max 10W)
free contact (relay)
24Vdc (max 10W)
For Normally Open contacts
For Normally Open contacts
For Normally Open contacts
52 ohm for RG58 or similar type cable
Programming Unit and Oview Command
or 8.2KΩ resistance).
Self-learning of the motor version connected
-20°C ÷ +50°C
No
IP54
310 x 210 x 125 mm
3.5 kg

NDCC2301

Mono-phase

1x 230Vac (+10% -10%) 50/60Hz
1.5KW
F1: 10A type T quartz
F4: 1A type T quartz