Configuration Programmes - Corghi CompactLine Serie Manual De Uso

- press the Enter
to confirm and switch to the
diameter value entry phase;
- change the value of the diam-
eter displayed by entering that
indicated on the tyre using the
keypad;
- press the Enter
to confirm and switch to the
distance value entry phase;
- change the value of the distance
displayed by entering that indi-
cated on the internal sensor (A,
Fig. 22) using the keypad;
- press the Exit
Automatic locking device C opening/closure function
If the control pedal C is not working (L, Fig.10), the locking system C can be opened/closed as follows:
- Select the
- press enter
This function can be inserted in the bar of the main icons, as explained in Preferred programme
configuration.

CONFIGURATION PROGRAMMES

The Configuration programmes are those functions that are intended for customising the
machine's operation and are normally executed when the machine is installed.
The list of the configuration programmes can be displayed as follows:
- select the utility and configuration programmes
- select the configuration programmes icon
110
button
button
button to terminate the manual data setting.
icon;
to open or close the automatic locking system C.
Operator's manual EM 9280 - EM 9280 C CompactLine
icon;
.
22