in parallel with no need to reset any data.
- RPA: - Automatic wheel positioning in the position where the balancing weight has to
be applied.
- Possibility to select the position for applying the adhesive weight:
• vertical plane in the lower part of the wheel (H6) using the LASER line;
• vertical plane in the upper part of the wheel (H12);
• CLIP: using the weight-holder terminal in the ALUP balancing programmes (in all other
H12 balancing programmes).
- LED light (if present).
- LASER indicator (if present).
- Single-phase power supply voltage ................ 100/115 ±10%, 200/230 V ±10%, 50/60 Hz
- Rated power ................................................................................................................... 122 W
- Rated current ............................................................... 1.2 A at 100-115V, 0.6 A at 200-230V
- Balancing speed ....................................................................................................90/130 rpm
- Maximum unbalance value calculated ................................................................ 999 grams
- Average spin time (with 5"x14" wheel) ......................................................................... 7 sec
- Shaft diameter ............................................................................................................. 40 mm
- Ambient work temperature ...................................................................................5° to 40°C
- Weight of electrical / electronic components .............................................................4.5 kg
Machine dimensions (Fig.11/11a)
78
TECHNICAL DATA
1194
Operator's manual EM 9280 - EM 9280 C CompactLine
11
609