Compressed Air Hook-Up; Safety Regulations - Corghi CompactLine Serie Manual De Uso

COMPRESSED AIR HOOK-UP

CAUTION
All compressed air hook-ups must be carried out by qualified personnel only.
- The hook-up to the workshop's pneumatic system must ensure a minimum pressure of
7 bar (100 psi). Lower pressure levels may prevent the machine's AUTOMATIC WHEEL
LOCKING SYSTEM C from working properly.
- A universal union is used for connection to the compressed air system. No special or addi-
tional adaptor is needed for connection. A pressure-resistant hose with 6mm inner diameter
and 14mm outer diameter must be fastened to the notched union using the clamp provided
with the machine.
CAUTION
Non-compliance with the instructions and danger warnings can cause serious injuries to
the operator or other persons.
Do not operate the machine until you have read and understood all the danger/warning
notices in this manual.
In order to operate the machine correctly, it is necessary to be a qualified and authorised
operator, able to be trained and to know the safety regulations. Operators are expressly for-
bidden from using the machine under the influence of alcohol or drugs capable of affecting
physical and mental capacity.
The following conditions are essential:
- the operator must be able to read and understand the contents of this manual;
- have a thorough knowledge of the features and characteristics of the machine;
- keep unauthorised persons well clear of the working area;
- make sure that the machine has been installed in compliance with all relevant standards
and regulations in force;
- make sure that all machine operators are suitably trained, that they are capable of using
the machine correctly and safely and that they are adequately supervised during work;
- do not touch power lines or the inside of electric motors or any other electrical equipment
before making sure that they have been powered off;
- read this booklet carefully and learn how to use the machine correctly and safely;
- always keep this user manual in a place where it can be readily consulted and do not fail
to refer to it.
CAUTION
Do not remove or deface the DANGER, WARNING, CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. If one or more decals have been detached or
damaged, they can be replaced by your nearest manufacturer dealer.
- When using and carrying out maintenance on the machine, observe the unified industrial
accident prevention regulations for high voltage industrial equipment and rotating machin-
Operator's manual EM 9280 - EM 9280 C CompactLine

SAFETY REGULATIONS

UK
75