Corghi CompactLine Serie Manual De Uso página 98

Pe.
8. If the angle selected is greater than 120°, the machine displays Fig. 19a for approx.
3 seconds to indicate that the procedure in step 7 must be repeated correctly. If the
angle selected is less than 120°, the machine immediately displays the value of the
two outer weights P1 and P2 on the screen.
9. Move the wheel to a centred position (P1 or P2).
10. The brake intervenes automatically in the centred position, then apply the balancing
weight indicated on the monitor as described in the chapter "ALU 1P, ALU 2P pro-
grammes".
11. Move the wheel to a centred position (P1 or P2).
12. Repeat the operations in step 10.
13. Once the Hidden Weights programme procedure is complete, you may continue work-
ing with any other balancing programme.
Standard ALU Programmes (ALU 1, 2, 3, 4, 5)
Standard ALU programmes take into account the different possibilities of weight ap-
plication (Fig. 20)
and provide correct unbalance values while maintaining the rated geometric data set-
ting of the alloy wheel.
ALU 1 balancing programme:
calculates statistically the balancing weights to be applied on the inner part of the rim,
as illustrated by the relevant icon.
98 Operator's manual EM 9280 - EM 9280 C CompactLine
20