Wheel Data Entry - Corghi EM 9580 Manual De Uso

are listed below:
1. Balancing programs icon
; if called up, it groups the functions
relating to the balancing types.
2. The utility and configuration programmes
icon groups all utility and configu-
ration programmes of the machine.
3. The highest accuracy
balancing results to be displayed with best
possible accuracy ("G x1" or "Oz 1/10").
4. The help
mation relating to the current screen. If an
error message is displayed, the first piece of
information displayed concerns the type of
errors that may occur. The instructions called
up by this icon integrate (but do not replace)
this User Manual.
By default the icons relating to points 3 and 4 are
those described above but can be replaced with
more frequently used ones (refer to the "Preferred
programme configuration" section).
EM 9580 - Operator's manual
icon allows
icon displays the infor-

WHEEL DATA ENTRY

Wheel data entry for wheel
balancers without an
ultrasonic sensor
The machine allows for the diameter and distance
values to be entered automatically; the width
value can be entered using the keypad.
- Bring the automatic measuring arm into contact
with the inner side of the rim (fig.14). Take great
care to position the arm correctly so as to ensure
accurate data reading.
- Keep the arm in contact with the rim until the
machine has acquired the wheel's diameter and
distance values. The following screen appears
during this phase:
14
UK
61