Description Of Wheel Balancer Functions - Corghi EYE LIGHT Manual De Uso

A
Turn on the machine using the switch located on
the left-hand side of the body (B, fig.11b).
B
At start-up, the wheel balancer performs a series
of control tests and displays the message "please
wait". If no anomaly is detected, it displays the
customisation data and mark.
Note: if the image is not centred on the LCD
monitor, adjust it using the controls located on
the front part of the monitor. For further informa-
tion on the adjustment procedure, refer to the
monitor manual provided, which can be found
inside the packaging.
EYE LIGHT - Operator's manual
DESCRIPTION OF WHEEL
BALANCER FUNCTIONS
Graphics are completely icon-based (drawings
and symbols that represent the function of the
button). If an icon is selected, the relevant func-
tion is activated.
At start-up, the wheel balancer displays the main
logo which can display the time and/or workshop
data (see the Customisation section).
11a
By pressing anywhere on the touchscreen, you
can display the main working screen.
11b
Before starting a balancing operation, the follow-
ing steps must be followed:
- Mount the wheel on the hub using the most
suitable centring system.
- Make sure that the wheel is correctly locked
to the shaft so that no displacement can occur
during the spin and braking phases (ref. section
"using the automatic wheel clamping system");
- Remove any counterweight, pebbles, dirt or
other foreign bodies.
UK
53