Corghi EM 9580 Manual De Uso página 69

"Movable planes" program
This function is automatically enabled when an ALU P program is selected.
It modifies the selected positions for the application of adhesive weights, so as to ensure perfect
balancing of the wheel using commercially available adhesive weights (i.e. multiples of five grams).
The accuracy of the machine is thereby improved, avoiding rounding off or cutting the weights to be
applied to come closer to the actual unbalance values.
The modified positions, where the adhesive weights are to be applied, are identified by the user
according to the information given by the wheel balancer (see the BALANCING WEIGHT APPLICA-
TION section).
This programme divides the outer weight Pe into two weights P1 and P2 located in any position
chosen by the operator.
The only condition is that the two weights and the original outer weight Pe must be within an angle
of 120°, as shown in fig. 23.
Fig. 23. Conditions for using the Hidden Weights programme
The Hidden Weight programme is to be used on
alloy rims, only and exclusively in conjunction
with the ALU1P/ALU2P programme, when:
- when the outer weight would rather be hidden
behind two spokes for aesthetic reasons;
To use this programme, proceed as follows:
1. Select either ALU1P or ALU2P before starting.
by selecting the ALU 1P Balancing programme
icon or the ALU 2P Balancing programme icon.
The mask for measuring the unbalance on alloy
rims is displayed.
2. Perform the wheel balancing procedure as
described in the chapter "ALU1P, ALU2P
Programmes", but without applying the outer
weight.
3. Select the Hidden weight icon. If the wheel
is balanced on the outer side, the machine
displays the message shown in Fig. 24b on
the screen.
EM 9580 - Operator's manual
(
available with
"Hidden weight" programme
ALU P
(
available with
ALU P
programmes only
)
programmes only
Fig. 24 Hidden Weights: procedure error
If there is an unbalance on the outer side (Pe) the
machine will display the graphic that indicates
the selection of the P1 weight position.
Press at any time to exit the "Hidden Weights"
programme .
4. To make work easier mark the position of the
unbalance Pe on the tyre. To do this, move the
)
23
UK
24
69