Corghi EM 9580 Manual De Uso página 65

- Apply the protective cap to the sleeve.
- Fit the locking device by making it slide on the
hub until it comes into contact with the wheel.
- Hold the control pedal down until the wheel is
completely locked against the flange.
Wheel release
- Press the control pedal for at least one second
to release the wheel from the flange.
Centring with flanges
C hub removal
- Keep the
for at least 3 seconds to lock the wheel-holder
shaft and the internal devices.
- Insert the C special key provided with the
machine in the C hub hole (fig. 16).
- Unscrew the C hub completely.
- Mount the flange on the shaft and lock it with
the two screws (A, fig. 17) using the CH 6 wrench.
A
- Lock the wheel onto the flange as usual.
EM 9580 - Operator's manual
keypad button pressed
16
17
C hub mounting
Proceed as follows to remount the C hub:
- Keep the button pressed
3 seconds to lock the wheel-holder shaft and
the internal clutch.
- Screw the C hub manually until it reaches the
end position.
- Tighten the C hub by inserting the C special
wrench into the C hub hole (fig. 18).
for at least
18
UK
65