Description Of Wheel Balancer Functions; Balancing Programmes; Position Indicators And Alarm Indicator Lights - Corghi EM9980 Manual De Uso

DESCRIPTION OF WHEEL
BALANCER FUNCTIONS
Graphics are completely icon-based (drawings
and symbols that represent the function of the
button). If an icon is selected, the relevant func-
tion is activated.
At start-up, the wheel balancer displays the main
logo which can display the workshop data (see
the Customisation section).
By pressing anywhere on the touchscreen, you
can display the main working screen.
Before starting a balancing operation, the follow-
ing steps must be followed:
- Mount the wheel on the hub using the most
suitable centring system.
- Make sure that the wheel is correctly locked
to the shaft so that no displacement can occur
during the spin and braking phases (ref. section
"using the automatic wheel clamping system");
- Remove any counterweight, pebbles, dirt or
other foreign bodies.
EM9980 - Operator's manual
BALANCING
PROGRAMMES
At start-up, by default, the wheel balancer ex-
ecutes the Dynamic programme which uses clip
weights on both sides.
The balancing programmes can be recalled by
simply selecting on the touchscreen the icon
for the weight according to the type of rim and
professional experience:
if the weight to be applied is a spring type
or
if the weight to be applied is adhesive.
Each combination of weights corresponds to a
specific balancing programme that will be dis-
play in the top part of the screen (e.g.. dynamic,
alu1, etc.).
Note: a different type of weight can also be se-
lected at the end of the dimension measurement
and unbalance calculation cycle.
Note: the Static programme, that uses only one
weight, is activated by selecting the icon for the
desired weight on the touchscreen and disabling
the icon that is not required.
POSITION INDICATORS
AND ALARM INDICATOR
LIGHTS
The wheel balancer has two round indicators for
the positioning of unbalances.
UK
51