Grillo G131 Manual De Instrucciones página 13

Translation of the original instructions
- Lubricate the clutch and gas wires.
-
Lubricate the sliding
bearing
of the handle lock stud.
-
Check that the clutch wire
always
has
a
little clearance.
-Remove any leaves and grass that may have deposited on the engine front grid.
-
Often check oil levels and clean the air filter
frequently.
Grease the machine coupling 2 or 3 times a year, by separating the rotary tiller from the flange.
- For machines supplied with electric starter keep the charging battery clips protected with a thin
layer of Vaseline.
END OF SEASON MAINTENANCE
Wash the machine carefully; change the oil inside the engine, the gearbox and the tiller gearbox,
clean the air filter. Sharpen the tines; if they are badly worn they should be changed. Notice: when
the tines are changed it is also necessary to change the central knife.
IN CASE OF LONG IDLE PERIODS
In case the machine is not to be used for a long period, remove the battery keeping it in a dry place
and recharge it once a month at least.
MAINTENANCE SUMMARY TABLE
EVERY 8 AFTER 20 EVERY 50 EVERY
100
HOURS
ONCE A
YEAR OR
PROCEDURE
HOURS HOURS
HOURS
EVERY 200
HOURS
check the level
Engine oil
change
check
Air filter
replace
check blade
Cutter bar
attachment
grease
Check
that the
engine intake
grid
is
clean
check the level
Gearbox oil
replace
Check that
blades
are
well-
sharpened and well-fixed
Lubricate with grease
recommended procedure
procedure to be carried out if necessary
10