Grillo G131 Manual De Instrucciones página 12

Translation of the
original
instructions
h v e r
tirmly
depressed.
Attontion!
Do
not
use
the
machine whilst
only
partially depressing
the red lever or damage to teh clutch may result.
s 0
note: To
avoid problems
to
the clutch during the functioning
of the
machine, please
keep
END OF wORK
isning
work,
set
tho
goarbox
and PTO
in idlo
positlon.
If the machine
is
fitted with
electric
starting
remove
the
ignition
key.
USEFUL ADVICE FOR GOOD RESULTS
1) Never leave the machine in the rain.
)
Do
not strain the gearbox
if
the
gears
do not engage at
once
but work the clutch
slightly
while
engaging it.
3) Never strain the
engine
too
much;
in
case
of excessive smoke from the exhaust
pipe,
reduce speed.
4) Regulate the central blade in order to work on hard or soft soils (fig. 26).
MAINTENANCE AND LUBRICATION
CAUTIONI
Before performing any cleaning, maintenance or repalr operation always wear suitable
clothing and working gloves.
- When the machine or part of it is lifted to carry out maintenance operations, always
remember to use suitable fixing tools such as holders and safety locks.
-
When
carrying
out
maintenance
operations and/or
when
the
machine
is
tilted
without
safety locks or supports, never leave it unguarded in places where inexperienced people
and children
could
have easy
access
to it.
Protect the environment: carefully dispose of used oils and any other pollutant product!
- Effective maintenance and correct lubrication help to keep the machine fully efficient.
Notice: to check oil levels always keep the machine in horizontal position.
ENGINE OIL
Carefully follow the directions in the manual. However it is necessary to check oil level every 4
working hours and change it every 100 hours. Use engine oil AGIP 15W40.
AIR FILTER
Check oil level every 8 hours or even more frequently in very dusty environments (fig. 2 , no. 10).
Use the same oil as for the engine for any changes of oil, which should be replaced quite
frequently,
or
to restore
the
level.
GEARBOx OIL
Check oil level every 50 working hours and if necessary add gearbox oil type MP 85 W/90 (quantity
2,8 kg). Change oil once a year. To drain the old oil unscrew the plug (no. 18 on fig. 3)
TILLER GEARBOX OIL
Check oil level every 100 hours unscrewing the screw on the tiller gearbox cover (fig. 8). Check
that oil reaches the edge of the hole. If necessary add the same oil as for the gearbox. Change the
oil once per year (quantity 0.400 kg. about 1 b.). The observance of these rules helps to keep all
the mechanical parts of your machine fully efficient.
GENERAL MAINTENANCE
The
walking tractor
G131
does not
require special maintenance.
However,
to
keep
it
at
its
highest
performance the following operations are recommended:
Check that all
screws and
nuts
are ightened, particularly
those
fixing
the tines,
those
of
the
engine and of the rotary tiller at the flange.