Idiomas disponibles
Idiomas disponibles
Oven ControS,Clock and Timer
Clock
The clock must be set for the automatic
oven timing
functions
to work properly.. The time of day cannot be
changed
during
a Timed
Baking
or a Self-Cleaning
cycle°
To Set the Clock:
1. Press the CLOCK pad.
2.
ress the INCREASE
or DECREASE
pad
to set the time of day_
3. Press the CLOCK
pad to start.
Power Outage
After a power outage, when power is restored
the dis-
play will flash and time shown
will no longer be cor-
rect--for
example
after a 5-minute
power interruption
the clock will be 5 minutes
slow.
All other functions
that were
in operation
when
the
power went out will have to be programmed
again.
Timer
The timer is a minute
timer only; it does not control
oven operations°
The maximum
setting
on the timer
is 9 hours and 55 minutes.
To Set the Timer:
1. Press the TIMER pad.
2.
ress the INCREASE
or DECREASE
pad
to set the amount of time on the timer..
The timer will start
automatically
within
a
[_
few seconds
of releasing
the INCREASE
or
DECREASE
pad..
The timer, as you are setting
it, will display
seconds
until 1 minute is reached.
Then it will display
minutes
and seconds
until 60
minutes
is reached.
After 60 minutes,
it will display
hours ("HR"
now appears
in display)
and minutes
until the maximum
time of 9 hours and 55 minutes
is reached.
To Reset the Timer:
If "TIMER"
is displayed,
press
the
INCREASE
or
DECREASE
pad until the desired time is reached.
If "TIMER"
is not displayed,
press the "TIMER"
pad
first, then follow the instructions
above to set the timer.
To Cancel
the Timer:
Press
and
hold
the
TIMER
pad
until
the
word
"TIMER"
disappears
from the display.
End of Cycle Tones
The end of cycle tone is a series of three beeps
fol-
lowed by one beep every six seconds.
If you would
like
to
remove
the
signal
that
beeps
every
six
seconds,
press and hold the CLEAR/OFF
pad for 10
seconds.
To return
the signal
that beeps
every
six seconds,
press and hold the CLEARIOFF
pad for 10 seconds.
Display Messages
If "door"
appears
in the display,
the oven door
is open.
If "LOCK"
appears
in the display,
the oven
door
is in the
locked
position.
BAKE,
BROIL
and
COOK
TIME cannot be set if the door is in the locked
position_
