Idiomas disponibles
Idiomas disponibles
PROBLEM
POSSIBLE
CAUSE
SURFACE
LIGHT DOES
• Fluorescent
bulb is loose or defective.
Adjust or replace,,
NOT WORK
° Switch operating
light is broken,
Call for service
OVEN WILL NOT
o Oven temperature
is too high to set self-cleaning
operation,
SELF-CLEAN
Allow the range to cool to room temperature
and reset the controls.
o Door latch handle not moved all the way to the right.
OVEN
DOOR WILL
• The oven must cool below the locking temperature
after the clean cycle
NOT UNLOCK
is complete,
Do not lock door with door
latch except
when
using
the
self-clean
feature
or the oven
may lock.
° Press the CLEAR/OFF
pad. Allow the oven to cool. Unlatch the door.
DOOR ACCIDENTALLY
LOCKED
WHILE
BAKING
OVEN
NOT CLEAN AFTER
CLEAN
CYCLE
"door" APPEARS
IN THE DISPLAY
OVEN CONTROL
SIGNALS
AFTER
ENTERING
COOK
TIME OR STOP TIME
o Oven controls
not set properly. See the Operating
the Self-Cleaning
Oven section
o Heavily soiled ovens require 3'A to 4 hours of cleaning
time.
° Heavy
spilIovers
should be cleaned
up before starting
clean cycle.
o Self-cleaning
cycle has been selected
but latch handle was not moved all the
way to the righL Move the latch handle.,
o Latch handle was moved to the right but a program
other than self-cleaning
was selected_ Move the latch handle to the right only when setting self-
cleaning
cycle,
o This is reminding
you to enter a bake temperature
(see the Baking section),,
47
