Idiomas disponibles
Idiomas disponibles
Operating the $elfoCleaning Oven (continoedl
To Stop a Clean Cycle
1. Press the CLEAR/OFF
pad
2. When the lock light goes off, open the door°
After a Clean Cycle
When the clean cycle
is finished,
the word "CLEAN"
will go out in the display
and the oven
will begin to
cool. When the oven temperature
has fallen below the
locking
temperature
the word "LOCK"
goes out and
the door can be opened
After a clean cycle, you may notice some white ash in
the oven_ Just wipe it up with a damp
cloth° If white
spots
remain,
remove
them with a soap-filled
steel
wool pad. Be sure to rinse thoroughly
with a vinegar
and water mixture.
These
deposits
are usually a salt
residue that cannot be removed
by the clean cycle°
If the oven is not clean after one clean cycle, the cycle
may be repeated
If the shelves
have become
hard to slide, wipe the
shelf supports
with cooking
oil.
How to Delay Start of Cleaning
Delay Start is setting the oven timer to start the clean
cycle automatically
at a later time than the present
time of day.
NOTE:
Before
beginning,
make sure the oven clock
shows the correct
time of day°
Quick ReminderIDelay
Start for
Self-Clean:
1. Prepare
the oven for cleaning.
2. Close and latch the oven door
3. Press the CLEAN
pad.
4. Press
the
INCREASE
pad_ If you
wish
to
change
preset clean time of 4 hours, press the
INCREASE
or
DECREASE
pad
until
the
desired
time appears_
5. Press the STOP TIME pad
Time that appears
is 4 hours later than the time of
day. Press
the
INCREASE
pad until the Stop
Time you desire appears
in the display. The self-
clean
cycle
will
automatically
begin
4 hours
before the Stop Time you select.
For example:
Let's say it's 7:00 and you want the
oven to begin
self-cleaning
at 9:00 after you're
fin-
ished
in the kitchen.
The oven
has been preset
to
clean for four hours
1. Follow
the directions
in the Before
a Clean
Cycle
section
2. Close the oven door and slide
the latch handle
to the right
as far as it wilt god Make sure
the oven light is off.
Never
force
the door
latch
handle.
Forcing
the
handle may damage
the door lock mechanism,
_3.
Press the CLEAN pad_
4. Press the INCREASE
pad The oven is sol
5. Clean
T_me is preset for 4 hours_ You can change
the clean time to any time between
2 and 4 hours,
depending
on the amount
of soil in your oven. If a
shorter
Clean
Time
is
desired,
press
the
DECREASE
pad until the desired
Clean
Time
is
displayed°
6. Press the STOP TIME pad_ "11:00" appears
in the display
and "STOP
TIME"
flashes.
The control
automatically
sets
the
Stop
Time by adding the Clean Time to the time
of day
In this example,
the time of day is
7:00 and the Clean Time is 4 hours. Adding
4 hours to the time of day equals
11:00.
7. Change the Stop Time from 11:00 to 1:00 by press-
ing the INCREASE
pad until "1:00" appears
in the
display
The
words
"DELAY
CLEAN"
will
also
appear
in the display.
The selFclean
cycle will automatically
begin at 9:00
and finish at 1:00o The word
"ON" will appear
in the
display at 9:00.
When
the oven locks, the word
"LOCK"
witl be dis-
played
and a short time later, the door latch handle
will be locked in position° It wilt not be possible to open
the oven door until the temperature
drops
below the
lock temperature.
When
the clean cycle is finished,
the word "CLEAN"
will go out in the display
and the oven
will begin
to
cool. When the oven temperature
has fallen below the
locking
temperature
the word "LOCK"
goes out and
the door can be opened.
8. When
the LOCK
light is off, slide the latch handle
to the left as far as it will go and open the door.
Never force the latch
handle.
Wait until the word
"LOCK"
goes out in the display.
Forcing
the latch
handle may damage
the door lock.
22
