DENTSPLY Cavitron SPS Instrucciones De Uso página 13

Ocultar thumbs Ver también para Cavitron SPS:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
5. Hold the handpiece (without an insert
installed) over a sink or drain. Activate the foot
control and flush water through handpiece for
at least thirty seconds.
6. Place a sterilized insert into the handpiece.
Shut down at the end of the day
1. Flush the Cavitron
according to the dental treatment unit
manufacturer's instructions.
2. Remove any ultrasonic inserts and the
®
Steri-Mate
handpiece. Clean and sterilize
the handpiece and all inserts used during
the procedure. (Refer to the Infection
Control Information booklet and the Cavitron
Ultrasonic Inserts Directions for Use for
cleaning and sterilizing instructions.)
3. Clean and disinfect the handpiece cable
assembly by applying a water-based
disinfectant solution*, carefully following
the instructions provided by the solution
manufacturer. To clean the cable, generously
spray disinfectant solution on a clean
towel and wipe the cable and connector.
Discard used towel. To disinfect the system,
generously spray disinfectant on a clean towel
and wipe the cable and connector. Allow the
disinfectant solution to air dry.
4. Clean and disinfect all surfaces of the dental
treatment control head according to the
manufacturer's instructions.
5. Place the cable connector into the handpiece
holder for storage.
6. Turn OFF the power and water to the dental
treatment unit.
*NOTE: Water-based disinfection solutions are preferred. A
1:10 solution of Sodium Hypochlorite (bleach) and water is
recommended. Some alcohol-based disinfectant solutions
may discolor the handpiece cable and connector.
10.2 Technical Support and Repairs
For technical support and repair assistance call
DENTSPLY Professional Cavitron Care
Certified Service at 1-800-989-8826 Monday
through Friday, 8:00 A.M. to 5:00 P.M. (Eastern
Time). For areas outside the U.S., contact your
local DENTSPLY Professional representative.
®
ultrasonic system
SM
Factory
ENGLISH • 13
loading