Bosch EPS 205 Manual Original página 28

en 28 | EPS 205 | Commissioning
2. Enter username on the keyboard
or
3. Open virtual keyboard by clicking
 The "Ease of Access" dialog box opens.
4. Select option Type without the keyboard (On-
Screen Keyboard).
5. Select <OK>.
 The virtual keyboard opens.
6. Enter username.
7. Select <Next>.
8. Heed and follow the instructions on the screen.
 Windows 7 is installed.
 The EPS 200 system software starts (default lan-
guage is English).
 The start screen appears.
|
1 689 989 186 2017-10-27
6.8.2
After starting up the EPS 200 system software the lan-
guage to be used for working with the EPS 205 must be
set (English is the standard ex works language)
Procedure:
1. Start mask: Select "System >> Settings".
2. Select the required language.
3. Save and continue with <F12>.
 This completes language setting.
i
The system software is described in the Online
Help. The Online Help can be called up in every
dialog window with <F1>. The Online Help cannot be
. opened during CRI/CRIN and CRI Piezo testing.
i
Do not install ESI[tronic] 2.0 on the EPS 205.
6.8.3
The latest test procedures and set values for the vari-
ous Bosch injectors are contained on the "TestData CD"
and have to be installed.
Procedure:
1. End the EPS 200 system software.
2. Connect the DVD drive with the EPS 205 (see oper-
ating instructions 1 689 989 350).
3. Insert the TestData CD 1 687 370 270 in the DVD
drive.
4. Double click to open "My Computer" on the Desk-
top.
5. Double click to open TestData CD*(e. g. *=2017/A).
6. Double click to start 'Setup.exe'.
 The "Select Setup Language" dialog window ap-
7. Select the installation language (e.g. "English" for
Great Britain) and confirm with <OK>.
 The start mask appears.
8. Heed the information in the start mask and press
<Continue> to proceed with installation.
9. Select the component EPS 200 and press <Contin-
ue> to proceed with installation.
 The selected components are displayed.
10. Continue with <Install>.
 TestData are installed.
11. End installation with <Complete>.
12. Disconnect the DVD drive.
"
This completes database installation.
EPS 200 system software language setting
Installing TestData CD
pears after a few seconds.
Robert Bosch GmbH