Initial Start-Up By The Customer Service - Porsche Home Energy Manager 9Y0.915.686 Manual De Instrucciones

Initial start-up by the cus-
tomer service
After the energy manager has been installed, the de-
vice must be configured for initial start-up.
Information
Initial start-up may only be carried out by a qualified
electrician.
During initial start-up, a setup wizard in the Web
Application guides through the necessary settings
(e. g. connections, user profile, optimised charging).
Some of the settings entered here, such as those
involving the system and maintenance, can also be
changed later on by the home user. Within the instal-
lation wizard, the electrician must carry out the home
installation. This includes the configuration of the
current converters and the addition of EEBus devices.
After this, the energy manager is ready for operation.
Requirements for initial start-up
Have the following information to hand for setting up
the energy manager:
– Letter containing access data for logging into the
Web Application
–
Private data such as the access data of your
home network and the access data of the user
profile (to link it with your Porsche ID) do not
need to be specified.
–
Information on electricity tariffs/prices and any
feed-in remuneration
Information
Only the letter containing access data is required for
partial commissioning. All other settings can also be
made later.
The following browsers are supported by the Web
Application:
–
Google Chrome version 57 or later (recommen-
ded)
–
Mozilla Firefox version 52 or later (recommen-
ded)
–
Microsoft Internet Explorer version 11 or later
–
Microsoft Edge (recommended)
–
Apple Safari version 10 or later
e
The detailed description of the installation assis-
tant with all the steps can be found in the on-
line version of the installation instructions on the
Porsche website at the following address:
https://tinyurl.com/porsche-e-help

Initial start-up by the customer service

53