Porsche Home Energy Manager 9Y0.915.686 Manual De Instrucciones página 61

1. ActivatePowerline Communication .
2. Add the energy manager to the PLC network:
– Option 1:with the pairing button
–
Press the pairing button on the PLC
modem.
– Within 60 seconds, select button Con-
nect in the Web Application.
– Option 2: by entering the security code on
the energy manager
– Select option Establish connection with
PLC security code in the Web Applica-
tion,
–
Enter the security code of the PLC mo-
dem.
–
Select button Connect.
–
Option 3: by entering the security code on
the PLC modem.
Note: For this, you will need a PLC modem
with HomePlug standard (not included in
the scope of delivery). This option is only
possible if no other PLC connection has al-
ready been established.
– On the PLC modem, enter the security
code of the energy manager to register
it in the PLC network.
–
Choose whether to have the IP address
assigned automatically (recommended)
or to define it each time.
�� If the IP address is assigned automatically,
it appears as soon as the connection to the
network has been established.
Establish direct PLC communication with the
charger:
1. Activate DHCP server in the Web Application.
– or –
To enable the DHCP server, press and hold the
PLC pairing button on the Home Energy Manager
for more than 10 seconds.
2. Select button Connect in the Web Application .
– or –
Briefly press the PLC pairing button at Home
Energy Manager.
3. Within 60 seconds, press the PLC pairing button
on the charger (Settings e Networks e PLC).
Information
Interfering power consumers, power network equip-
ment or an unsuitable network topology can cause
temporary or permanent PLC communication fail-
ures.
Ethernet
Data is sent via an Ethernet cable that connects
the energy manager to the network, e.g. network
router. Once a connection has been established, an
IP address is automatically assigned to the energy
manager.
1. Connect the Ethernet cable to the energy man-
ager (port ETH0).
2. Choose whether to have the IP address assigned
automatically (recommended) or to define it
each time.
Starting Initial Installation
6. Set user profiles
Information
If you don't yet have a Porsche ID, you can create
one first. You can link the Porsche ID later on. To do
this, go to Connections > User profiles. To transfer
data to your Porsche ID account, the device must be
connected to the Internet.
You can also retrieve information on the energy man-
ager in your Porsche ID account. For this purpose, the
energy manager must be linked with the Porsche ID.
b The energy manager has an Internet connection.
1. Select button Link Porsche ID.
�� The dialogue Link user profile opens.
2. Select the appropriate option, depending on
whether there is an Internet connection:
Optional Explanation
b Your device has an Internet
To My Porsche
connection
e
You will be redirected
straight to the login page of
the Porsche ID account.
b Your device does not have
Further op-
tions
an Internet connection
e
Using a device that has an
Internet connection, scan
the displayed QR code or
enter the displayed URL
manually in your browser.
e
On the Porsche ID account website, enter your
login data (Porsche ID, password).
59