Calling Up The Web Application Via The Hotspot; Calling Up The Web Application Via Wifi; Charging; Vehicle Charge Port - Porsche 9Y0.012.003-ROW Manual De Instrucciones

Charging

US
Information
– Depending on which browser you are using,
the web application will not open immediately,
FC
but information about the browser's security
settings will be displayed first.
– How you will need to enter the network key
ESM
for calling up the web application depends on
the device's operating system.
PTB
Calling up the web application via
TR
the hotspot
The web application can be called up using a device
(PC, tablet or smartphone) via a hotspot set up by the
RU
charger.
To set up a hotspot:
f Refer to chapter "Hotspot" on page 11.
UK
e To call up the web application while a hotspot is
active, enter the following IP address in the
VIE
browser's address line: 192.168.0.1
HE
Calling up the web application
via WiFi
AR
The web application can be called up in the browser
on a device (PC, tablet or smartphone) that is logged
into the same home network as the charger.
JPN
e Enter the current IP address of the charger in
the browser's address line. You will find
KOR
the current IP address under S
.
N
ETWORK INFORMATION
– or –
CHS
e Enter the host name of the charger in the
browser's address line. You will find the host
CHT
name in the letter containing access data.
THA
12
Charging

Vehicle charge port

For information on connecting and disconnecting the
vehicle cable to and from the vehicle charge port and
for the charging and connection status at the vehicle
charge port:
f see Owner's Manual.
DANGER
Risk of serious or fatal injury due to fire or electric
shock.
e Always observe the specified sequence for the
charging process.
e Do not disconnect the vehicle cable from the
vehicle charge port during the charging process.
e End the charging process before disconnecting
the vehicle cable from the vehicle charge port.
e Do not disconnect the charger from the electrical
socket during the charging process.
Errors are shown on the display and are indicated by
red status LEDs. The error message, the cause and
a remedial measure will be displayed.
f Refer to chapter "Malfunctions" on page 14.
>
ETTINGS

Starting charging

1. Insert the power plug into the electrical socket.
The display switches on.
2. Insert the vehicle plug into the vehicle charge
port.
Electric shock, fire
For information on connecting the vehicle
cable to the vehicle charge port:
f see Owner's Manual.
Following a successful self-test and when the
connection is established, the status LEDs light
up white.
3. Charging starts automatically.
4. After a few minutes, the display switches to
standby mode.
The vehicle starts charging.
Information
– Charging is controlled by the vehicle. The
charging process can only be stopped at the
vehicle.
– The charge status is shown on the display
provided the charger is not in standby mode.
The display can be switched on again by pressing
the Power button
– A high-temperature switch-off feature prevents
overheating while charging.
Power button lights up white.
Status LEDs light up white.
Power button lights up white.
Status LEDs pulsate white.
Power button lights up white.
Status LEDs pulsate green.
.