Mandatory Safety Signs That The Manufacturer Of The System Must Display In The Workplace And Around The Rotary Blades Vacuum Pump; Conditions And Limits Of Use - List Of Dangers - battioni Pagani FAN 420 Manual De Instrucciones De Uso Y Mantenimiento

Setting the pace since 1953
MANDATORY SAFETY SIGNS THAT THE MANUFACTURER OF THE
SYSTEM MUST DISPLAY IN THE WORKPLACE AND AROUND THE
ATTENTION
MOVING
PARTS
DO NOT ENTER
THE WORK AREA
OF THE CARDAN
SHAFT DRIVE IN MOTION.
AVOID WORK CLOTHES
WITH FLAPS THAT COULD
BECOME ENTANGLED.
CONDITIONS AND LIMITS OF USE – LIST OF DANGERS
In the Common Market countries, the installation must comply with directive 2006/42/CE and subsequent modifi cations,
while in the other countries it must comply with the safety regulations of the country.
This Rotary blades vacuum pump has been designed to create a vacuum or pressure inside a tank connected to it.
Under no circumstances must liquids, dust or any kind of solid matter enter the Rotary blades vacuum pump
because they could cause it to break. Therefore it is necessary to equip the system with safety valves.
The use of the Rotary blades vacuum pump for any purpose other than that specifi ed above is absolutely forbidden,
not provided for by the manufacturer and therefore highly dangerous.
Do not use the Rotary blades vacuum pump to handle fl ammable and/or explosive liquids and materials or for
materials that give off fl ammable gasses.
Do not use the rotary blades vacuum pump in a potentially explosive atmosphere.
Never remove the guards fi tted on the Rotary blades vacuum pump and always check their effi ciency every time
the machine is used.
Any work on the machine must be carried out while it is not running.
Failure to comply with the instructions provided in this manual may result in the following dangers:
• Danger of being crushed by the weight of the rotary blades vacuum pump during handling and transportation;
• Danger of becoming entangled in the transmission parts if the necessary guards are removed;
• Heat dangers due to the temperatures that can be reached by the rotary blades vacuum pump;
• Acoustic danger due to the noise generated and to failure to use personal means of protection;
• Danger of severing for the operator during testing with the suction and delivery tubes detached from the pump;
• Danger of abrasion due to the shaft of the hydraulic pump support if the rotary blades vacuum pump is operated with the hydraulic
pump dismantled;
• Danger of projection of fl uid and solid materials owing to a serious breakage of the rotary blades vacuum pump;
ROTARY BLADES VACUUM PUMP
ATTENTION
HOT WALLS
READ THIS MANUAL
BEFORE
STARTING TO USE
THE ROTARY BLADES
VACUUM PUMP
INDICATION OF THE DIRECTION OF ROTATION OF THE HANDLE TO
SELECT THE STAGES OF ASPIRATION OR COMPRESSION.
DANGER
ATTENTION
TO HANDS
MAINTENANCE TO
BE PERFORMED
PERSONAL
PROTECTIVE
EQUIPMENT
THAT MUST
BE USED
page 25