Identification Plate; Instructions For Use And Maintenance; Packaging, Storage, Handling And Transportation; Packaging - battioni Pagani FAN 420 Manual De Instrucciones De Uso Y Mantenimiento

Setting the pace since 1953

1.2 - IDENTIFICATION PLATE

Each rotary blade vacuum pump is supplied with an identification label, indicating:
• rotary blades vacuum pump model
• serial number;
• year of manufacturing
• maximum relative pressure
• maximum vacuum
• maximum absorbed power
• maximum number revolutions
• max weight capacity
• CE Marking.
• weight of the pump
Every identification plate is protected by a special sky-blue colour film, to remove after painting.
This film has been introduced to guarantee the tracing of the pump for warranty purposes.

INSTRUCTIONS FOR USE AND MAINTENANCE

2 - PACKAGING, STORAGE, HANDLING AND TRANSPORTATION

2.1 - PACKAGING

The rotary blades vacuum pumps are supplied without packaging. On request the following packaging can be used:
• wooden base and shrink-wrap;
• wooden crates and shrink-wrap for shipment by sea or air.

2.2 - STORAGE

In order to preserve the rotary blades vacuum pump correctly, it must be stored:
• indoors, sheltered from adverse weather conditions;
• resting horizontally on its four feet.
The rotary blades vacuum pumps are lubricated during testing at our factory with special oil that ensures lubrication of the various
internal components for approx. 6 months. In the event of subsequent storage it is advisable to wash the inside of the body with oil
and diesel oil (as stated in this manual).

2.3 - HANDLING AND TRANSPORTATION

To view the data concerning the mass of the FAN pump see the technical annexes.
Only be moved using equipment with adequate load and range capacity.
Slung through metal hooks to be inserted into the relevant grip holes, or sling; lifted by forklift truck (if on pallet),
bridge crane, crane or hoist.
If on pallets, loosen the screws holding the 4 feet of the FAN pump to the pallet.
For safety reasons, use a sling or chain to lift the pump, together with the eyebolt.
Pass the sling or chain below the FAN pump, between the support feet
Hook the sling or chain to the lifting equipment.
The rotary blades vacuum pump is provided with protection in accordance
with the EC Directives in the part to be mounted by the installer
using the screws provided.
IDENTIFICATION PLATE WITH PROTECTIVE
FILM FOR PAINTING
Figure 1
Figure 2
page 29