Obligatory Safety Signs To Be Displayed In The Work Place And In The Vicinity Of The In The Workplace And Around The Rotary Blades Vacuum Pump; Conditions And Limits Of Use - List Of Dangers - battioni Pagani BALLAST 3500 Manual De Instrucciones De Uso Y Mantenimiento

COMPULSORY SAFETY SIGNS THAT THE MANUFACTURER OF THE SYSTEM MUST
DISPLAY IN THE WORK PLACE AND AROUND THE ROTARY BLADES VACUUM PUMP
MOVING
PARTS
DO NOT ENTER THE WORKING
AREA OF THE MOVING CARDAN
SHAFT. AVOID WEARING WORK
CLOTHES WITH PARTS OR
FLAPS THAT COULD GET
HOOKED UP
CONDITIONS AND LIMITS OF USE – LIST OF DANGERS
In the Common Market countries, the installation must comply with directive 2006/42/CE and subsequent modifications,
while in the other countries it must comply with the safety regulations of the country.
This Rotary blades vacuum pump has been designed to create a vacuum or pressure inside a tank connected to it.
Under no circumstances must liquids, dust or any kind of solid matter enter the Rotary blades
vacuum pump because they could cause it to break. Therefore it is necessary to equip the system
with safety valves.
The use of the Rotary blades vacuum pump for any purpose other than that specified above is
absolutely forbidden, not provided for by the manufacturer and therefore highly dangerous.
Do not use the Rotary blades vacuum pump to handle flammable and/or explosive liquids and
materials or for materials that give off flammable gasses.
Do not use the rotary blades vacuum pump in a potentially explosive atmosphere.
Never remove the guards fitted on the Rotary blades vacuum pump and always check their
efficiency every time the machine is used.
Any work on the machine must be carried out while it is not running.
Failure to comply with the instructions provided in this manual may result in the following dangers:
• Danger of being crushed by the rotary blades vacuum pump mass during handling
and transportation;
• Danger of becoming entangled in the shaft transmission parts if the necessary guards are removed;
• Heat dangers due to the temperatures that can be reached by the rotary blades vacuum pump;
• Acoustic danger due to the noise generated and to failure to use personal means of protection;
• Danger of severing for the operator during testing with the suction and delivery tubes detached from the pump;
• Danger of abrasion due to the shaft of the hydraulic pump support if the rotary blades vacuum pump is being operated
with the hydraulic pump disassembled;
• Danger of projection of fluid and solid materials owing to a serious breakage of the rotary blades vacuum pump.
HIGH
TEMPERATURE
READ THIS MANUAL
BEFORE STARTING
TO USE THE ROTARY
BLADES VACUUM PUMP
INDICATION OF THE DIRECTION OF ROTATION
OF THE HANDLE TO SELECT THE ASPIRATION
OR COMPRESSION PHASES.
user and maintenance
instruction manual BALLAST series
DANGER
OF CRUSHING
MAINTENANCE
INDIVIDUAL MEANS
TO BE
OF PROTECTION
CARRIED OUT
THAT MUST BE USED
p. 31