Spreader Beam And Adapter For Fork Lifters - Pfeifer 181520 Traducción Del Manual Original

8.5 Spreader Beam and Adapter for Fork Lifters

Spreader Beam
Spreader beam for direct attachment to the fork lifter.
Load suspension by central load hook. Safety device
by two lower T-screws with moveable pressing disks.
With lateral feet at both ends for storage.
Adapter
Adapter for direct attachment to one fork prong. Load
suspension by load hook. Safety device by one lower
T-screw.
Optional equipment
• Load hook with ball bearing for swivelling under load
General safety precautions
• The dimensions of the suspension pocket(s) must
correspond to the dimensions of the fork prong(s).
• The load hooks are not swivelling under load
(they are only for positioning without load)!
Specific remarks for this model
8.5.1 Attachment devices may exclusively be suspend-
ed in the load hooks!
If the attachment devices are put
directly over the spreader beam, they
can slip and consequently lead to
crash of the load.
DANGER
8.5.2 Before taking up the load you must safeguard the
T-screws to be tightened properly.
If the T-screws are not tightened
properly, the spreader beam can slip
from the fork arm and hurt persons
or damage objects.
DANGER
8.5.3 The load may exclusively be taken up vertically
and must not be drawn.
If the load is drawn, the spreader
bean can slip from the fork arm
despite the safety T-screws and hurt
persons or damage objects.
DANGER
8.5.4 When lowering the spreader beam, the stocking
feet must not hit any objects or be placed on other
objects.
If the load or later the spreader beam
is not in a stable position,
it can tilt and hurt persons or
damage objects.
CAUTION
PFEIFER spreader bars 01/2016 V 2.0 / Subject to technical changes!
15