Pixsys ATR244-12ABC Manual De Instalación página 65

269 SS.ti. Soft-Start Time
Max. Softstart duration: if the processs will not reach the threshold selected on par. SS.tH. within
the selected time, the controller starts to regulate on setpoint.
Disabled
00:00
00:01-24:00
270 MA.ti. Maintenance Time
Maintenance time for pre-programmed cycle.
00:00-24:00
271 FA.Gr. Falling Gradient
Falling gradient for pre-programmed cycle.
Disabled (Default)
0
Digit/hour
1..10000
272 de.st. Delayed Start
To set the initial waiting time for the delayed start of the setting or cycle, even in case of a
blackout. The elapsed time is saved every 10 minutes.
0
00:01-24:00 hh.mm
273÷276 Reserved Parameters - Group Q
Reserved parameters - Group Q
GROUP R -
disp.
277 v.FLt Visualization Filter
Disabled
disab.
Pitchfork filter (Default)
ptcHf
First Order
f i.ord.
First Order with Pitchfork
f i.or.p .
2 Samples Mean
2 sa.m.
...n Samples Mean
....
10 Samples Mean
10.sa.m.
278 vi.d.2 Visualization Display 2
Selects visualization on display 2.
Command 1 setpoint (Default)
c.1.SPv
Percentage of command output 1
ou.Pe.1
Value read on input AI1.
A.iN.1
Value read on input AI2.
A.in.2
Arithmetic average of the value read on inputs AI1 and AI2 [(AI1-AI2)/2].
MEAn
Difference of the values read on inputs AI1 and AI2 (AI1-AI2).
diFF .
Module of the difference of the values read on inputs AI1 and AI2 (|AI1-AI2|).
Ab.dif .
Sum of values read on inputs AI1 and AI2 (AI1+AI2).
SuM
Command 2 setpoint
c.2.SPv
Percentage of command output 2
ou.Pe.2
Ampere from current transformer
AMPer.
279 tMo.d. Timeout Display
Determines the display timeout
Disabled. Display always ON
diSab.
(Default)
15 seconds
1S S
1 minute
1 Min
hh:mm (Default: 00:15)
hh.mm (Default: 00:00)
(degrees.tenths/hour if temperature)
1 p. 74
Initial waiting time disabled: the controller starts immediately (Default)
Initial waiting time enabled.
- Display and interface
5 minutes
5 Min
10 minutes
10Min
30 minutes
30Min
1 hour
1 h
User manual - ATR244 - 65