Pixsys ATR244-12ABC Manual De Instalación página 43

67 Automatic / Manual 2
a.ma.2
Enables the automatic/manual selection for command 2
Disabled (Default)
diSab.
Enabled
Enab.
Enabled with memory
En.Sto.
68 Reserved
rEs.
Reserved parameter
69 Reserved
rEs.
Reserved parameter
70 Initial Value Setpoint 2
i.SP.2
Determines the initial value (at start) of setpoint 1 of command 2 when
parameter 65
c.S.p .2
-9999..+30000 [digit
71÷72 Reserved Parameters - Group D
Reserved parameters - Group D
GROUP E -
reG. 1
73 Tune 1
tun. 1
Selects autotuning type for command 1
Disabled. If proportional band and integral time paramters are to selected to zero, the
diSab.
regulation is ON/OFF type.. (Default)
Automatic (Automatic P.I.D. parameters calculation )
Auto
Manual (launch by keyboards or by digital input)
Manu.
Once (P.I.D. parameters calculation only at first start)
OncE
Synchronized (Autotuning managed by serial)
SYncH.
74 Setpoint Deviation Tune 1
s.d.t. 1
Selects deviation from command setpoint 1 as threshold used by
autotuning to calculate P.I.D. parameters
0-10000 [digit
1 p. 74
75 Proportional Band 1
p.b. 1
Proportional band or process 1 P.I.D. regulation (Process inertia).
0 ON / OFF if
t. i .
1...10000 [digit
1 p. 74
76 Integral Time 1
i.t. 1
Integral time for process 1 P.I.D. regulation (process inertia duration).
0.0...2000.0 sec. (0.0 = integral disabled), Default 0.0
77 Derivative Time 1
d.t. 1
Derivative time for process 1 P.I.D. regulation (Normally ¼ of integral time).
0.0...1000.0 sec. (0.0 = derivative disabled), Default 0
78 Dead Band 1
d.b. 1
Dead band of process 1 P.I.D..
0...10000 [digit
(Command Setpoint Protection 2)
] (degrees for temperature sensors). Default 0.
1 p. 74
- Autotuning and PID 1
] (degrees.tenths for temp. sensors). Default: 30.0.
equal to 0 (Default)
] (degrees.tenths for temp. sensors).
] (degrees.tenths for temp. sensors) (Default: 0)
1 p. 74
is selected on
FR.iN.
User manual - ATR244 - 43