Pixsys ATR244-12ABC Manual De Instalación página 25

Modbus
Description
address
773 Last character of the custom alarm message 2
801 First character of the custom alarm message 3
...
823 Last character of the custom alarm message 3
851 First character of the custom alarm message 4
...
873 Last character of the custom alarm message 4
901 First character of the custom alarm message 5
...
923 Last character of the custom alarm message 5
951 First character of the custom alarm message 6
...
973 Last character of the custom alarm message 6
1000 AI1 value (degrees with tenth)
1001 AI2 value (degrees with tenth)
1002 Average between AI1 and AI2 [(AI1 + AI2) /2] (degrees with tenth)
1003 Difference between AI1 and AI2 (AI1 - AI2) (degrees with tenth)
Module of the difference between AI1 and AI2 (|AI1 - AI2|) (degrees with
1004
tenth)
1005 Sum of AI1 and AI2 (AI1 + AI2) (degrees with tenth)
1006 Real setpoint (gradient) of the regulation loop 1
1007 Real setpoint (gradient) of the regulation loop 2
Alarms status (0=absent, 1=present)
Bit0 = Alarm 1
1008
Bit1 = Alarm 2
Bit2 = Alarm 3
Error flags 1
Bit0 = AI1 process error (sensor 1)
Bit1 = AI2 process error (sensor 2)
Bit2 = Cold junction error
Bit3 = Safety error
Bit4 = Generic error
Bit5 = Hardware error
Bit6 = Error H.B.A. (partial rupture of the load)
1009 Bit7 = Error H.B.A. (SSR in short circuit)
Bit8 = Overcurrent error
Bit9 = Parameters out of range error
Bit10= CPU eeprom writing error
Bit11= RFid eeprom writing error
Bit12= CPU eeprom reading error
Bit13= RFid eeprom reading error
Bit14= Eeprom calibrations bench corrupted
Bit15= Eeprom constants bench corrupted
Error flags 2
Bit0 = Missing calibrations error
Bit1 = Eeprom CPU bench parameters corrupted
1010
Bit2 = Eeprom CPU setpoint bench corrupted
Bit3 = RFid memory not formatted
Bit4 = Error AI2 disabled
Digital inputs status (0=not active, 1=active)
1011 Bit0 = Digital inp. 1 Bit2 = Digital inp. 3
Bit1 = Digital inp. 2 Bit3 = Digital inp. 4
Bit3 = Alarm 4
Bit4 = Alarm 5
Bit5 = Alarm 6
Read Reset
Write value
RW 0
RW "u"
RW 0
RW "u"
RW 0
RW "u"
RW 0
RW "u"
RW 0
RO -
RO -
RO 0
RO 0
RO 0
RO 0
RO 0
RO 0
RO 0
RO 0
RO 0
RO 0
User manual - ATR244 - 25