Installing The Bag - Nogueira NSG-9200 Manual De Instrucciones

Installing the bag

After the Grain Silo Filler is in the operating position, proceed as described here after to install the bag:
fig.39
1- Release the chains from the existing
stretchers from both sides of the machine and
pull the tray.
NOTE: See how there are two chains on both
sides of the tray. Only the one on top of the
stretcher hook must be released.
Keep the lower one attached to the machine, as it
prevents the tray from coming off the tracks.
2- Remove the 4 fasteners which hold the hanger
to the body of the machine.
22
fig.40
Instructions manual
3- Place the hanger on the ground near the tray.
4- Remove the pin from the arm (above figure).
Pull the arm and place the pin in the other hole,
so the arm is stretched.
5- Remove the latch pin from the ratchet.
fig.41
fig.42
fig.43