Nogueira NSG-9200 Manual De Instrucciones página 32

Changing the brake fluid (continuation)
3- Insert the hose in the brake bleeder, and the
other end bathed in the jar with a little clean brake
fluid (fig.69);
4- Use an open or box-end wrench to open the
bleeder;
fig.69
fig.70
5- Open the valve (A);
32
Instructions manual
6- Open the pump valve (B);
7- Open the lever (C) on the pump several
repeated times, until all the fluid is expelled;
8- Remove the cover (D) (fig.71) and fill the
pump with new brake fluid;
9- Open the lever several repeated times, until
the new fluid flows through the bleeder;
10- Close the bleeder.
After the fluid change, bleed the brake system as
stated in the instructions in this manual. This
procedure is necessary in order to assure
perfect brake operations.
fig.71
fig.70A