Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating position (continuation)
fig.09
1- Place the foot support base in the above
displayed position. If it is necessary lift the
machine a little using the jack.
fig.10
2- Remove the jack from the head bar and place it
in the above displayed.
fig.11
3- Just loosen the four screws holding the above
mentioned wheel support.
14
Instructions manual
fig.12
4- Using the jack, lift the machine and remove
the previously mentioned wheel.
fig.13
5- Disassemble the wheel bracket (used only in
the transport position).
fig.14
6- Place the wheel in the above displayed
position.
Capítulos
Tabla de contenido
